Author: Lingevibes.online

  • Ocean 

    The ocean is the body of salt water that covers approximately 70.8% of Earth.[8] In English, the term ocean also refers to any of the large bodies of water into which the world ocean is conventionally divided.[9] The following names describe five different areas of the ocean: PacificAtlanticIndianAntarctic/Southern, and Arctic.[10][11] The ocean contains 97% of Earth’s water[8] and is the primary component of Earth’s hydrosphere and is thereby essential to life on Earth. The ocean influences climate and weather patterns, the carbon cycle, and the water cycle by acting as a huge heat reservoir.

    Pacific Ocean of Earth seen from space in 1969

    Ocean scientists split the ocean into vertical and horizontal zones based on physical and biological conditions. The pelagic zone is the open ocean’s water column from the surface to the ocean floor. The water column is further divided into zones based on depth and the amount of light present. The photic zone starts at the surface and is defined to be “the depth at which light intensity is only 1% of the surface value”[12]: 36  (approximately 200 m in the open ocean). This is the zone where photosynthesis can occur. In this process plants and microscopic algae (free-floating phytoplankton) use light, water, carbon dioxide, and nutrients to produce organic matter. As a result, the photic zone is the most biodiverse and the source of the food supply which sustains most of the ocean ecosystem. Ocean photosynthesis also produces half of the oxygen in the Earth’s atmosphere.[13] Light can only penetrate a few hundred more meters; the rest of the deeper ocean is cold and dark (these zones are called mesopelagic and aphotic zones). The continental shelf is where the ocean meets dry land. It is more shallow, with a depth of a few hundred meters or less. Human activity often has negative impacts on marine life within the continental shelf.

    Ocean temperatures depend on the amount of solar radiation reaching the ocean surface. In the tropics, surface temperatures can rise to over 30 °C (86 °F). Near the poles where sea ice forms, the temperature in equilibrium is about −2 °C (28 °F). In all parts of the ocean, deep ocean temperatures range between −2 °C (28 °F) and 5 °C (41 °F).[14] Constant circulation of water in the ocean creates ocean currents. Those currents are caused by forces operating on the water, such as temperature and salinity differences, atmospheric circulation (wind), and the Coriolis effect.[15] Tides create tidal currents, while wind and waves cause surface currents. The Gulf StreamKuroshio CurrentAgulhas Current and Antarctic Circumpolar Current are all major ocean currents. Such currents transport massive amounts of water, gases, pollutants and heat to different parts of the world, and from the surface into the deep ocean. All this has impacts on the global climate system.

    World map with colored, directed lines showing how water moves through the oceans. Cold deep water rises and warms in the central Pacific and in the Indian, whereas warm water sinks and cools near Greenland in the North Atlantic and near Antarctica in the South Atlantic.
    A map of the global thermohaline circulation; blue represents deep-water currents, whereas red represents surface currents.

    Ocean water contains dissolved gases, including oxygencarbon dioxide and nitrogen. An exchange of these gases occurs at the ocean’s surface. The solubility of these gases depends on the temperature and salinity of the water.[16] The carbon dioxide concentration in the atmosphere is rising due to CO2 emissions, mainly from fossil fuel combustion. As the oceans absorb CO2 from the atmosphere, a higher concentration leads to ocean acidification (a drop in pH value).[17]

    The ocean provides many benefits to humans such as ecosystem services, access to seafood and other marine resources, and a means of transport. The ocean is known to be the habitat of over 230,000 species, but may hold considerably more – perhaps over two million species.[18] Yet, the ocean faces many environmental threats, such as marine pollutionoverfishing, and the effects of climate change. Those effects include ocean warming, ocean acidification and sea level rise. The continental shelf and coastal waters are most affected by human activity.

    Terminology

    Ocean and sea

    The terms “the ocean” or “the sea” used without specification refer to the interconnected body of salt water covering the majority of Earth’s surface.[10][11] It includes the PacificAtlanticIndianSouthern/Antarctic, and Arctic oceans.[19] As a general term, “the ocean” and “the sea” are often interchangeable.[20]

    Strictly speaking, a “sea” is a body of water (generally a division of the world ocean) partly or fully enclosed by land.[21] The word “sea” can also be used for many specific, much smaller bodies of seawater, such as the North Sea or the Red Sea. There is no sharp distinction between seas and oceans, though generally seas are smaller, and are often partly (as marginal seas) or wholly (as inland seas) bordered by land.[22]

    World Ocean

    “World Ocean” redirects here; not to be confused with ocean world. “Ocean Sea” redirects here. For the 1993 novel by Alessandro Baricco, see Ocean Sea (novel).

    The contemporary concept of the World Ocean was coined in the early 20th century by the Russian oceanographer Yuly Shokalsky to refer to the continuous ocean that covers and encircles most of Earth.[23][24] The global, interconnected body of salt water is sometimes referred to as the World Ocean, global ocean or the great ocean.[25][26][27] The concept of a continuous body of water with relatively unrestricted exchange between its components is critical in oceanography.[28]

    Etymology

    The word ocean comes from the figure in classical antiquityOceanus (/oʊˈsiːənəs/Ancient GreekὨκεανός Ōkeanós,[29] pronounced [ɔːkeanós]), the elder of the Titans in classical Greek mythology. Oceanus was believed by the ancient Greeks and Romans to be the divine personification of an enormous river encircling the world.

    The concept of Ōkeanós could have an Indo-European connection. Greek Ōkeanós has been compared to the Vedic epithet ā-śáyāna-, predicated of the dragon Vṛtra-, who captured the cows/rivers. Related to this notion, the Okeanos is represented with a dragon-tail on some early Greek vases.[30]

    According to M. L. West, the etymology of Oceanus is “obscure” and “cannot be explained from Greek”.[31] The use by Pherecydes of Syros of the form

    ‹The template below is included via a redirect (Template:Transl) that is under discussion. See redirects for discussion to help reach a consensus.›

    Ōgenós (Ὠγενός)[32] for the name lends support for the name being a loanword.[33] However, according to West, no “very convincing” foreign models have been found.[34] A Semitic derivation has been suggested by several scholars,[35] while R. S. P. Beekes has suggested a loanword from the Aegean Pre-Greek non-Indo-European substrate.[36] Nevertheless, Michael Janda sees possible Indo-European connections.[37]

    Natural history

    Further information: List of ancient oceans

    Origin of water

    Further information: Origin of water on Earth

    Scientists believe that a sizable quantity of water would have been in the material that formed Earth.[38] Water molecules would have escaped Earth’s gravity more easily when it was less massive during its formation. This is called atmospheric escape.

    During planetary formation, Earth possibly had magma oceans. Subsequently, outgassingvolcanic activity and meteorite impacts, produced an early atmosphere of carbon dioxidenitrogen and water vapor, according to current theories. The gases and the atmosphere are thought to have accumulated over millions of years. After Earth’s surface had significantly cooled, the water vapor over time would have condensed, forming Earth’s first oceans.[39] The early oceans might have been significantly hotter than today and appeared green due to high iron content.[40]

    Geological evidence helps constrain the time frame for liquid water existing on Earth. A sample of pillow basalt (a type of rock formed during an underwater eruption) was recovered from the Isua Greenstone Belt and provides evidence that water existed on Earth 3.8 billion years ago.[41] In the Nuvvuagittuq Greenstone BeltQuebec, Canada, rocks dated at 3.8 billion years old by one study[42] and 4.28 billion years old by another[43] show evidence of the presence of water at these ages.[41] If oceans existed earlier than this, any geological evidence either has yet to be discovered, or has since been destroyed by geological processes like crustal recycling. However, in August 2020, researchers reported that sufficient water to fill the oceans may have always been on the Earth since the beginning of the planet’s formation.[44][45][46] In this model, atmospheric greenhouse gases kept the oceans from freezing when the newly forming Sun had only 70% of its current luminosity.[47]

    Ocean formation

    Main article: Paleoceanography

    The origin of Earth’s oceans is unknown. Oceans are thought to have formed in the Hadean eon and may have been the cause for the emergence of life.

    Plate tectonicspost-glacial rebound, and sea level rise continually change the coastline and structure of the world ocean. A global ocean has existed in one form or another on Earth for eons.

    Since its formation the ocean has taken many conditions and shapes with many past ocean divisions and potentially at times covering the whole globe.[48]

    During colder climatic periods, more ice caps and glaciers form, and enough of the global water supply accumulates as ice to lessen the amounts in other parts of the water cycle. The reverse is true during warm periods. During the last ice age, glaciers covered almost one-third of Earth’s land mass with the result being that the oceans were about 122 m (400 ft) lower than today. During the last global “warm spell,” about 125,000 years ago, the seas were about 5.5 m (18 ft) higher than they are now. About three million years ago the oceans could have been up to 50 m (165 ft) higher.[49]

    Geography

    Further information: Water distribution on Earth

    World map of the five-ocean model with approximate boundaries

    The entire ocean, containing 97% of Earth’s water, spans 70.8% of Earth‘s surface,[8] making it Earth’s global ocean or world ocean.[23][25] This makes Earth, along with its vibrant hydrosphere a “water world”[50][51] or “ocean world“,[52][53] particularly in Earth’s early history when the ocean is thought to have possibly covered Earth completely.[48] The ocean’s shape is irregular, unevenly dominating the Earth’s surface. This leads to the distinction of the Earth’s surface into a water and land hemisphere, as well as the division of the ocean into different oceans.

    Seawater covers about 361,000,000 km2 (139,000,000 sq mi) and the ocean’s furthest pole of inaccessibility, known as “Point Nemo“, in a region known as spacecraft cemetery of the South Pacific Ocean, at 48°52.6′S 123°23.6′W. This point is roughly 2,688 km (1,670 mi) from the nearest land.[54]

    Oceanic divisions

    Further information: Borders of the oceans

    Map of Earth centered on its ocean, showing the different ocean divisions

    There are different customs to subdivide the ocean and are adjourned by smaller bodies of water such as, seasgulfsbaysbights, and straits.

    The ocean is customarily divided into five principal oceans – listed below in descending order of area and volume:

    #OceanLocationArea
    (km2)
    Volume
    (km3)
    Avg. depth
    (m)
    Coastline
    (km)[55]
    1Pacific OceanBetween Asia and Australasia and the Americas[56]168,723,000
    (46.6%)
    669,880,000
    (50.1%)
    3,970135,663
    (35.9%)
    2Atlantic OceanBetween the Americas and Europe and Africa[57]85,133,000
    (23.5%)
    310,410,900
    (23.3%)
    3,646111,866
    (29.6%)
    3Indian OceanBetween southern AsiaAfrica and Australia[58]70,560,000
    (19.5%)
    264,000,000
    (19.8%)
    3,74166,526
    (17.6%)
    4Antarctic/Southern OceanBetween Antarctica and the Pacific, Atlantic and Indian oceans
    Sometimes considered an extension of those three oceans.[59][60]
    21,960,000
    (6.1%)
    71,800,000
    (5.4%)
    3,27017,968
    (4.8%)
    5Arctic OceanBetween northern North America and Eurasia in the Arctic
    Sometimes considered a marginal sea of the Atlantic.[61][62][63]
    15,558,000
    (4.3%)
    18,750,000
    (1.4%)
    1,20545,389
    (12.0%)
    Total361,900,000
    (100%)
    1.335×109
    (100%)
    3,688377,412
    (100%)

    NB: Volume, area, and average depth figures include NOAA ETOPO1 figures for marginal South China Sea.
    Sources: Encyclopedia of Earth,[56][57][58][59][63] International Hydrographic Organization,[60] Regional Oceanography: an Introduction (Tomczak, 2005),[61] Encyclopædia Britannica,[62] and the International Telecommunication Union.[55]

    Ocean basins

    Further information: List of submarine topographical features

    Bathymetry of the ocean floor showing the continental shelves and oceanic plateaus (red), the mid-ocean ridges (yellow-green) and the abyssal plains (blue to purple)

    The ocean fills Earth’s oceanic basins. Earth’s oceanic basins cover different geologic provinces of Earth’s oceanic crust as well as continental crust. As such it covers mainly Earth’s structural basins, but also continental shelfs.

    In mid-ocean, magma is constantly being thrust through the seabed between adjoining plates to form mid-oceanic ridges and here convection currents within the mantle tend to drive the two plates apart. Parallel to these ridges and nearer the coasts, one oceanic plate may slide beneath another oceanic plate in a process known as subduction. Deep trenches are formed here and the process is accompanied by friction as the plates grind together. The movement proceeds in jerks which cause earthquakes, heat is produced and magma is forced up creating underwater mountains, some of which may form chains of volcanic islands near to deep trenches. Near some of the boundaries between the land and sea, the slightly denser oceanic plates slide beneath the continental plates and more subduction trenches are formed. As they grate together, the continental plates are deformed and buckle causing mountain building and seismic activity.[64][65]

    Every ocean basin has a mid-ocean ridge, which creates a long mountain range beneath the ocean. Together they form the global mid-oceanic ridge system that features the longest mountain range in the world. The longest continuous mountain range is 65,000 km (40,000 mi). This underwater mountain range is several times longer than the longest continental mountain range – the Andes.[66]

    Oceanographers of the Nippon Foundation-GEBCO Seabed 2030 Project (Seabed 2030) state that as of 2024 just over 26% of the ocean floor has been mapped at a higher resolution than provided by satellites, while the ocean as a whole will never be fully explored,[67] with some estimating 5% of it having been explored.[68]

    Interaction with the coast

    Main article: Coast

    Lighthouse at the coast of Ocean CountyNew Jersey, U.S., facing the Atlantic Ocean at sunrise

    The zone where land meets sea is known as the coast, and the part between the lowest spring tides and the upper limit reached by splashing waves is the shore. A beach is the accumulation of sand or shingle on the shore.[69] A headland is a point of land jutting out into the sea and a larger promontory is known as a cape. The indentation of a coastline, especially between two headlands, is a bay. A small bay with a narrow inlet is a cove and a large bay may be referred to as a gulf.[70] Coastlines are influenced by several factors including the strength of the waves arriving on the shore, the gradient of the land margin, the composition and hardness of the coastal rock, the inclination of the off-shore slope and the changes of the level of the land due to local uplift or submergence.[69]

    Normally, waves roll towards the shore at the rate of six to eight per minute and these are known as constructive waves as they tend to move material up the beach and have little erosive effect. Storm waves arrive on shore in rapid succession and are known as destructive waves as the swash moves beach material seawards. Under their influence, the sand and shingle on the beach is ground together and abraded. Around high tide, the power of a storm wave impacting on the foot of a cliff has a shattering effect as air in cracks and crevices is compressed and then expands rapidly with release of pressure. At the same time, sand and pebbles have an erosive effect as they are thrown against the rocks. This tends to undercut the cliff, and normal weathering processes such as the action of frost follows, causing further destruction. Gradually, a wave-cut platform develops at the foot of the cliff and this has a protective effect, reducing further wave-erosion.[69]

    Material worn from the margins of the land eventually ends up in the sea. Here it is subject to attrition as currents flowing parallel to the coast scour out channels and transport sand and pebbles away from their place of origin. Sediment carried to the sea by rivers settles on the seabed causing deltas to form in estuaries. All these materials move back and forth under the influence of waves, tides and currents.[69] Dredging removes material and deepens channels but may have unexpected effects elsewhere on the coastline. Governments make efforts to prevent flooding of the land by the building of breakwatersseawallsdykes and levees and other sea defences. For instance, the Thames Barrier is designed to protect London from a storm surge,[71] while the failure of the dykes and levees around New Orleans during Hurricane Katrina created a humanitarian crisis in the United States.

    Physical properties

    Color

    Ocean chlorophyll concentration is a proxy for phytoplankton biomass. In this map, blue colors represent lower chlorophyll and reds represent higher chlorophyll. Satellite-measured chlorophyll is estimated based on ocean color by how green the color of the water appears from space.

    This section is an excerpt from Ocean color.[edit]

    Most of the ocean is blue in color, but in some places the ocean is blue-green, green, or even yellow to brown.[72] Blue ocean color is a result of several factors. First, water preferentially absorbs red light, which means that blue light remains and is reflected back out of the water. Red light is most easily absorbed and thus does not reach great depths, usually to less than 50 meters (164 ft). Blue light, in comparison, can penetrate up to 200 meters (656 ft).[73] Second, water molecules and very tiny particles in ocean water preferentially scatter blue light more than light of other colors. Blue light scattering by water and tiny particles happens even in the very clearest ocean water,[74] and is similar to blue light scattering in the sky.The main substances that affect the color of the ocean include dissolved organic matter, living phytoplankton with chlorophyll pigments, and non-living particles like marine snow and mineral sediments.[75] Chlorophyll can be measured by satellite observations and serves as a proxy for ocean productivity (marine primary productivity) in surface waters. In long term composite satellite images, regions with high ocean productivity show up in yellow and green colors because they contain more (green) phytoplankton, whereas areas of low productivity show up in blue.

    Water cycle, weather, and rainfall

    Further information: Effects of climate change on the water cycle and Water distribution on Earth

    The ocean is a major driver of Earth’s water cycle.

    Ocean water represents the largest body of water within the global water cycle (oceans contain 97% of Earth’s water). Evaporation from the ocean moves water into the atmosphere to later rain back down onto land and the ocean.[76] Oceans have a significant effect on the biosphere. The ocean as a whole is thought to cover approximately 90% of the Earth’s biosphere.[77] Oceanic evaporation, as a phase of the water cycle, is the source of most rainfall (about 90%),[76] causing a global cloud cover of 67% and a consistent oceanic cloud cover of 72%.[78] Ocean temperatures affect climate and wind patterns that affect life on land. One of the most dramatic forms of weather occurs over the oceans: tropical cyclones (also called “typhoons” and “hurricanes” depending upon where the system forms).

    As the world’s ocean is the principal component of Earth’s hydrosphere, it is integral to life on Earth, forms part of the carbon cycle and water cycle, and – as a huge heat reservoir – influences climate and weather patterns.

    Waves and swell

    Duration: 13 seconds.0:13Movement of water as waves pass

    Main articles: Wind wave and Swell (ocean)

    The motions of the ocean surface, known as undulations or wind waves, are the partial and alternate rising and falling of the ocean surface. The series of mechanical waves that propagate along the interface between water and air is called swell – a term used in sailingsurfing and navigation.[79] These motions profoundly affect ships on the surface of the ocean and the well-being of people on those ships who might suffer from sea sickness.

    Wind blowing over the surface of a body of water forms waves that are perpendicular to the direction of the wind. The friction between air and water caused by a gentle breeze on a pond causes ripples to form. A stronger gust blowing over the ocean causes larger waves as the moving air pushes against the raised ridges of water. The waves reach their maximum height when the rate at which they are travelling nearly matches the speed of the wind. In open water, when the wind blows continuously as happens in the Southern Hemisphere in the Roaring Forties, long, organized masses of water called swell roll across the ocean.[80]: 83–84 [81][82] If the wind dies down, the wave formation is reduced, but already-formed waves continue to travel in their original direction until they meet land. The size of the waves depends on the fetch, the distance that the wind has blown over the water and the strength and duration of that wind. When waves meet others coming from different directions, interference between the two can produce broken, irregular seas.[81]

    Constructive interference can lead to the formation of unusually high rogue waves.[83] Most waves are less than 3 m (10 ft) high[83] and it is not unusual for strong storms to double or triple that height.[84] Rogue waves, however, have been documented at heights above 25 meters (82 ft).[85][86]

    The top of a wave is known as the crest, the lowest point between waves is the trough and the distance between the crests is the wavelength. The wave is pushed across the surface of the ocean by the wind, but this represents a transfer of energy and not horizontal movement of water. As waves approach land and move into shallow water, they change their behavior. If approaching at an angle, waves may bend (refraction) or wrap around rocks and headlands (diffraction). When the wave reaches a point where its deepest oscillations of the water contact the ocean floor, they begin to slow down. This pulls the crests closer together and increases the waves’ height, which is called wave shoaling. When the ratio of the wave’s height to the water depth increases above a certain limit, it “breaks“, toppling over in a mass of foaming water.[83] This rushes in a sheet up the beach before retreating into the ocean under the influence of gravity.[87]

    Earthquakesvolcanic eruptions or other major geological disturbances can set off waves that can lead to tsunamis in coastal areas which can be very dangerous.[88][89]

    Sea level and surface

    Further information: Sea level and Sea level rise

    The ocean’s surface is an important reference point for oceanography and geography, particularly as mean sea level. The ocean surface has globally little, but measurable topography, depending on the ocean’s volumes.

    The ocean surface is a crucial interface for oceanic and atmospheric processes. Allowing interchange of particles, enriching the air and water, as well as grounds by some particles becoming sediments. This interchange has fertilized life in the ocean, on land and air. All these processes and components together make up ocean surface ecosystems.

    Tides

    Main article: Tide

    High tide and low tide in the Bay of Fundy, Canada

    Tides are the regular rise and fall in water level experienced by oceans, primarily driven by the Moon‘s gravitational tidal forces upon the Earth. Tidal forces affect all matter on Earth, but only fluids like the ocean demonstrate the effects on human timescales. (For example, tidal forces acting on rock may produce tidal locking between two planetary bodies.) Though primarily driven by the Moon’s gravity, oceanic tides are also substantially modulated by the Sun’s tidal forces, by the rotation of the Earth, and by the shape of the rocky continents blocking oceanic water flow. (Tidal forces vary more with distance than the “base” force of gravity: the Moon’s tidal forces on Earth are more than double the Sun’s,[90] despite the latter’s much stronger gravitational force on Earth. Earth’s tidal forces upon the Moon are 20x stronger than the Moon’s tidal forces on the Earth.)

    The primary effect of lunar tidal forces is to bulge Earth matter towards the near and far sides of the Earth, relative to the moon. The “perpendicular” sides, from which the Moon appears in line with the local horizon, experience “tidal troughs”. Since it takes nearly 25 hours for the Earth to rotate under the Moon (accounting for the Moon’s 28-day orbit around Earth), tides thus cycle over a course of 12.5 hours. However, the rocky continents pose obstacles for the tidal bulges, so the timing of tidal maxima may not actually align with the Moon in most localities on Earth, as the oceans are forced to “dodge” the continents. Timing and magnitude of tides vary widely across the Earth as a result of the continents. Thus, knowing the Moon’s position does not allow a local to predict tide timings, instead requiring precomputed tide tables which account for the continents and the Sun, among others.

    During each tidal cycle, at any given place the tidal waters rise to maximum height, high tide, before ebbing away again to the minimum level, low tide. As the water recedes, it gradually reveals the foreshore, also known as the intertidal zone. The difference in height between the high tide and low tide is known as the tidal range or tidal amplitude.[91][92] When the sun and moon are aligned (full moon or new moon), the combined effect results in the higher “spring tides”, while the sun and moon misaligning (half moons) result in lesser tidal ranges.[91]

    In the open ocean tidal ranges are less than 1 meter, but in coastal areas these tidal ranges increase to more than 10 meters in some areas.[93] Some of the largest tidal ranges in the world occur in the Bay of Fundy and Ungava Bay in Canada, reaching up to 16 meters.[94] Other locations with record high tidal ranges include the Bristol Channel between England and Wales, Cook Inlet in Alaska, and the Río Gallegos in Argentina.[95]

    Tides are not to be confused with storm surges, which can occur when high winds pile water up against the coast in a shallow area and this, coupled with a low pressure system, can raise the surface of the ocean dramatically above a typical high tide.

    Depth

    Further information: Bathymetry

    The average depth of the oceans is about 4 km. More precisely the average depth is 3,688 meters (12,100 ft).[81] Nearly half of the world’s marine waters are over 3,000 meters (9,800 ft) deep.[27] “Deep ocean,” which is anything below 200 meters (660 ft), covers about 66% of Earth’s surface.[96] This figure does not include seas not connected to the World Ocean, such as the Caspian Sea.

    The deepest region of the ocean is at the Mariana Trench, located in the Pacific Ocean near the Northern Mariana Islands.[97] The maximum depth has been estimated to be 10,971 meters (35,994 ft). The British naval vessel Challenger II surveyed the trench in 1951 and named the deepest part of the trench the “Challenger Deep“. In 1960, the Trieste successfully reached the bottom of the trench, manned by a crew of two men.

    Oceanic zones

    Further information: Ocean stratification

    Drawing showing divisions according to depth and distance from shore
    The major oceanic zones, based on depth and biophysical conditions

    Oceanographers classify the ocean into vertical and horizontal zones based on physical and biological conditions. The pelagic zone consists of the water column of the open ocean, and can be divided into further regions categorized by light abundance and by depth.

    Grouped by light penetration

    Further information: Photic zoneMesopelagic zone, and Aphotic zone

    The ocean zones can be grouped by light penetration into (from top to bottom): the photic zone, the mesopelagic zone and the aphotic deep ocean zone:

    • The photic zone is defined to be “the depth at which light intensity is only 1% of the surface value”.[12]: 36  This is usually up to a depth of approximately 200 m in the open ocean. It is the region where photosynthesis can occur and is, therefore, the most biodiverse. Photosynthesis by plants and microscopic algae (free floating phytoplankton) allows the creation of organic matter from chemical precursors including water and carbon dioxide. This organic matter can then be consumed by other creatures. Much of the organic matter created in the photic zone is consumed there but some sinks into deeper waters. The pelagic part of the photic zone is known as the epipelagic.[98] The actual optics of light reflecting and penetrating at the ocean surface are complex.[12]: 34–39 
    • Below the photic zone is the mesopelagic or twilight zone where there is a very small amount of light. The basic concept is that with that little light photosynthesis is unlikely to achieve any net growth over respiration.[12]: 116–124 
    • Below that is the aphotic deep ocean to which no surface sunlight at all penetrates. Life that exists deeper than the photic zone must either rely on material sinking from above (see marine snow) or find another energy source. Hydrothermal vents are a source of energy in what is known as the aphotic zone (depths exceeding 200 m).[98]

    Grouped by depth and temperature

    The pelagic part of the aphotic zone can be further divided into vertical regions according to depth and temperature:[98]

    • The mesopelagic is the uppermost region. Its lowermost boundary is at a thermocline of 12 °C (54 °F) which generally lies at 700–1,000 meters (2,300–3,300 ft) in the tropics. Next is the bathypelagic lying between 10 and 4 °C (50 and 39 °F), typically between 700–1,000 meters (2,300–3,300 ft) and 2,000–4,000 meters (6,600–13,100 ft). Lying along the top of the abyssal plain is the abyssopelagic, whose lower boundary lies at about 6,000 meters (20,000 ft). The last and deepest zone is the hadalpelagic which includes the oceanic trench and lies between 6,000–11,000 meters (20,000–36,000 ft).
    • The benthic zones are aphotic and correspond to the three deepest zones of the deep-sea. The bathyal zone covers the continental slope down to about 4,000 meters (13,000 ft). The abyssal zone covers the abyssal plains between 4,000 and 6,000 m. Lastly, the hadal zone corresponds to the hadalpelagic zone, which is found in oceanic trenches.

    Distinct boundaries between ocean surface waters and deep waters can be drawn based on the properties of the water. These boundaries are called thermoclines (temperature), haloclines (salinity), chemoclines (chemistry), and pycnoclines (density). If a zone undergoes dramatic changes in temperature with depth, it contains a thermocline, a distinct boundary between warmer surface water and colder deep water. In tropical regions, the thermocline is typically deeper compared to higher latitudes. Unlike polar waters, where solar energy input is limited, temperature stratification is less pronounced, and a distinct thermocline is often absent. This is due to the fact that surface waters in polar latitudes are nearly as cold as deeper waters. Below the thermocline, water everywhere in the ocean is very cold, ranging from −1 °C to 3 °C. Because this deep and cold layer contains the bulk of ocean water, the average temperature of the world ocean is 3.9 °C.[99] If a zone undergoes dramatic changes in salinity with depth, it contains a halocline. If a zone undergoes a strong, vertical chemistry gradient with depth, it contains a chemocline. Temperature and salinity control ocean water density. Colder and saltier water is denser, and this density plays a crucial role in regulating the global water circulation within the ocean.[98] The halocline often coincides with the thermocline, and the combination produces a pronounced pycnocline, a boundary between less dense surface water and dense deep water.

    Grouped by distance from land

    The pelagic zone can be further subdivided into two sub regions based on distance from land: the neritic zone and the oceanic zone. The neritic zone covers the water directly above the continental shelves, including coastal waters. On the other hand, the oceanic zone includes all the completely open water.

    The littoral zone covers the region between low and high tide and represents the transitional area between marine and terrestrial conditions. It is also known as the intertidal zone because it is the area where tide level affects the conditions of the region.[98]

    Volumes

    The combined volume of water in all the oceans is roughly 1.335 billion cubic kilometers (1.335 sextillion liters, 320.3 million cubic miles).[81][100][101]

    This section is an excerpt from Hydrosphere.[edit]

    It has been estimated that there are 1.386 billion cubic kilometres (333 million cubic miles) of water on Earth.[102][103][104] This includes water in gaseous, liquid and frozen forms as soil moisture, groundwater and permafrost in the Earth’s crust (to a depth of 2 km); oceans and seaslakesrivers and streamswetlandsglaciers, ice and snow cover on Earth’s surface; vapour, droplets and crystals in the air; and part of living plants, animals and unicellular organisms of the biosphere. Saltwater accounts for 97.5% of this amount, whereas fresh water accounts for only 2.5%. Of this fresh water, 68.9% is in the form of ice and permanent snow cover in the Arctic, the Antarctic and mountain glaciers; 30.8% is in the form of fresh groundwater; and only 0.3% of the fresh water on Earth is in easily accessible lakes, reservoirs and river systems.[105]The total mass of Earth’s hydrosphere is about 1.4 × 1018 tonnes, which is about 0.023% of Earth’s total mass. At any given time, about 2 × 1013 tonnes of this is in the form of water vapor in the Earth’s atmosphere (for practical purposes, 1 cubic metre of water weighs 1 tonne). Approximately 71% of Earth’s surface, an area of some 361 million square kilometres (139.5 million square miles), is covered by ocean. The average salinity of Earth’s oceans is about 35 grams of salt per kilogram of sea water (3.5%).[106]

    Temperature

    Main articles: Ocean stratificationOcean heat content, and Photic zone

    Ocean temperatures depends on the amount of solar radiation falling on its surface. In the tropics, with the Sun nearly overhead, the temperature of the surface layers can rise to over 30 °C (86 °F) while near the poles the temperature in equilibrium with the sea ice is about −2 °C (28 °F). There is a continuous circulation of water in the oceans. Warm surface currents cool as they move away from the tropics, and the water becomes denser and sinks. The cold water moves back towards the equator as a deep sea current, driven by changes in the temperature and density of the water, before eventually welling up again towards the surface. Deep ocean water has a temperature between −2 °C (28 °F) and 5 °C (41 °F) in all parts of the globe.[14]

    The temperature gradient over the water depth is related to the way the surface water mixes with deeper water or does not mix (a lack of mixing is called ocean stratification). This depends on the temperature: in the tropics the warm surface layer of about 100 m is quite stable and does not mix much with deeper water, while near the poles winter cooling and storms makes the surface layer denser and it mixes to great depth and then stratifies again in summer. The photic depth is typically about 100 m (but varies) and is related to this heated surface layer.[107]

    This section is an excerpt from Effects of climate change on oceans § Rising ocean temperature.[edit]

    It is clear that the ocean is warming as a result of climate change, and this rate of warming is increasing.[108]: 9  The global ocean was the warmest it had ever been recorded by humans in 2022.[109] This is determined by the ocean heat content, which exceeded the previous 2021 maximum in 2022.[109] The steady rise in ocean temperatures is an unavoidable result of the Earth’s energy imbalance, which is primarily caused by rising levels of greenhouse gases.[109] Between pre-industrial times and the 2011–2020 decade, the ocean’s surface has heated between 0.68 and 1.01 °C.[110]: 1214 

    Temperature and salinity by region

    The temperature and salinity of ocean waters vary significantly across different regions. This is due to differences in the local water balance (precipitation vs. evaporation) and the “sea to air” temperature gradients. These characteristics can vary widely from one ocean region to another. The table below provides an illustration of the sort of values usually encountered.

    CharacteristicPolar regionsTemperate regionsTropical regions
    Precipitation vs. evaporationPrecip > EvapPrecip > EvapEvap > Precip
    Sea surface temperature in winter−2 °C5 to 20 °C20 to 25 °C
    Average salinity28‰ to 32‰35‰35‰ to 37‰
    Annual variation of air temperature≤ 40 °C10 °C< 5 °C
    Annual variation of water temperature< 5 °C10 °C< 5 °C

    Sea ice

    Main articles: Sea ice and Arctic sea ice decline

    Seawater with a typical salinity of 35‰ has a freezing point of about −1.8 °C (28.8 °F).[98][116] Because sea ice is less dense than water, it floats on the ocean’s surface (as does fresh water ice, which has an even lower density). Sea ice covers about 7% of the Earth’s surface and about 12% of the world’s oceans.[117][118][119] Sea ice usually starts to freeze at the very surface, initially as a very thin ice film. As further freezing takes place, this ice film thickens and can form ice sheets. The ice formed incorporates some sea salt, but much less than the seawater it forms from. As the ice forms with low salinity this results in saltier residual seawater. This in turn increases density and promotes vertical sinking of the water.[120]

    Ocean currents and global climate

    Further information: Ocean currentThermohaline circulation, and Ocean general circulation model

    Ocean surface currents

    See also: Effects of climate change on oceans § Changing ocean currents

    Types of ocean currents

    An ocean current is a continuous, directed flow of seawater caused by several forces acting upon the water. These include wind, the Coriolis effecttemperature and salinity differences.[15] Ocean currents are primarily horizontal water movements that have different origins such as tides for tidal currents, or wind and waves for surface currents.

    Tidal currents are in phase with the tide, hence are quasiperiodic; associated with the influence of the moon and sun pull on the ocean water. Tidal currents may form various complex patterns in certain places, most notably around headlands.[121] Non-periodic or non-tidal currents are created by the action of winds and changes in density of water. In littoral zones, breaking waves are so intense and the depth measurement so low, that maritime currents reach often 1 to 2 knots.[122]

    The wind and waves create surface currents (designated as “drift currents”). These currents can decompose in one quasi-permanent current (which varies within the hourly scale) and one movement of Stokes drift under the effect of rapid waves movement (which vary on timescales of a couple of seconds). The quasi-permanent current is accelerated by the breaking of waves, and in a lesser governing effect, by the friction of the wind on the surface.[122]

    This acceleration of the current takes place in the direction of waves and dominant wind. Accordingly, when the ocean depth increases, the rotation of the earth changes the direction of currents in proportion with the increase of depth, while friction lowers their speed. At a certain ocean depth, the current changes direction and is seen inverted in the opposite direction with current speed becoming null: known as the Ekman spiral. The influence of these currents is mainly experienced at the mixed layer of the ocean surface, often from 400 to 800 meters of maximum depth. These currents can considerably change and are dependent on the yearly seasons. If the mixed layer is less thick (10 to 20 meters), the quasi-permanent current at the surface can adopt quite a different direction in relation to the direction of the wind. In this case, the water column becomes virtually homogeneous above the thermocline.[122]

    The wind blowing on the ocean surface will set the water in motion. The global pattern of winds (also called atmospheric circulation) creates a global pattern of ocean currents. These are driven not only by the wind but also by the effect of the circulation of the earth (coriolis force). These major ocean currents include the Gulf StreamKuroshio CurrentAgulhas Current and Antarctic Circumpolar Current. The Antarctic Circumpolar Current encircles Antarctica and influences the area’s climate, connecting currents in several oceans.[122]

    Relationship of currents and climate

    Main article: Atlantic meridional overturning circulation

    Map of the Gulf Stream, a major ocean current that transports heat from the equator to northern latitudes and moderates the climate of Europe

    Collectively, currents move enormous amounts of water and heat around the globe influencing climate. These wind driven currents are largely confined to the top hundreds of meters of the ocean. At greater depth, the thermohaline circulation drives water motion. For example, the Atlantic meridional overturning circulation (AMOC) is driven by the cooling of surface waters in the polar latitudes in the north and south, creating dense water which sinks to the bottom of the ocean. This cold and dense water moves slowly away from the poles which is why the waters in the deepest layers of the world ocean are so cold. This deep ocean water circulation is relatively slow and water at the bottom of the ocean can be isolated from the ocean surface and atmosphere for hundreds or even a few thousand years.[122] This circulation has important impacts on the global climate system and on the uptake and redistribution of pollutants and gases such as carbon dioxide, for example by moving contaminants from the surface into the deep ocean.

    Ocean currents greatly affect Earth’s climate by transferring heat from the tropics to the polar regions. This affects air temperature and precipitation in coastal regions and further inland. Surface heat and freshwater fluxes create global density gradients, which drive the thermohaline circulation that is a part of large-scale ocean circulation. It plays an important role in supplying heat to the polar regions, and thus in sea ice regulation.[citation needed]

    Oceans moderate the climate of locations where prevailing winds blow in from the ocean. At similar latitudes, a place on Earth with more influence from the ocean will have a more moderate climate than a place with more influence from land. For example, the cities San Francisco (37.8 N) and New York (40.7 N) have different climates because San Francisco has more influence from the ocean. San Francisco, on the west coast of North America, gets winds from the west over the Pacific Ocean. New York, on the east coast of North America gets winds from the west over land, so New York has colder winters and hotter, earlier summers than San Francisco. Warmer ocean currents yield warmer climates in the long term, even at high latitudes. At similar latitudes, a place influenced by warm ocean currents will have a warmer climate overall than a place influenced by cold ocean currents.[citation needed]

    Changes in the thermohaline circulation are thought to have significant impacts on Earth’s energy budget. Because the thermohaline circulation determines the rate at which deep waters reach the surface, it may also significantly influence atmospheric carbon dioxide concentrations. Modern observations, climate simulations and paleoclimate reconstructions suggest that the Atlantic meridional overturning circulation (AMOC) has weakened since the preindustrial era. The latest climate change projections in 2021 suggest that the AMOC is likely to weaken further over the 21st century.[123]: 19  Such a weakening could cause large changes to global climate, with the North Atlantic particularly vulnerable.[123]: 19 

    Chemical properties

    Main article: Seawater § Properties

    Salinity

    Further information: Salinity § Seawater, and Seawater § Salinity

    Annual mean sea surface salinity in Practical Salinity Units (psu) from the World Ocean Atlas[124]

    Salinity is a measure of the total amounts of dissolved salts in seawater. It was originally measured via measurement of the amount of chloride in seawater and hence termed chlorinity. It is now standard practice to gauge it by measuring electrical conductivity of the water sample. Salinity can be calculated using the chlorinity, which is a measure of the total mass of halogen ions (includes fluorine, chlorine, bromine, and iodine) in seawater. According to an international agreement, the following formula is used to determine salinity:[125]Salinity (in ‰) = 1.80655 × Chlorinity (in ‰)

    The average ocean water chlorinity is about 19.2‰, and, thus, the average salinity is around 34.7‰.[125]

    Salinity has a major influence on the density of seawater. A zone of rapid salinity increase with depth is called a halocline. As seawater‘s salt content increases, so does the temperature at which its maximum density occurs. Salinity affects both the freezing and boiling points of water, with the boiling point increasing with salinity. At atmospheric pressure,[126] normal seawater freezes at a temperature of about −2 °C.

    Salinity is higher in Earth’s oceans where there is more evaporation and lower where there is more precipitation. If precipitation exceeds evaporation, as is the case in polar and some temperate regions, salinity will be lower. Salinity will be higher if evaporation exceeds precipitation, as is sometimes the case in tropical regions. For example, evaporation is greater than precipitation in the Mediterranean Sea, which has an average salinity of 38‰, more saline than the global average of 34.7‰.[127] Thus, oceanic waters in polar regions have lower salinity content than oceanic waters in tropical regions.[125] However, when sea ice forms at high latitudes, salt is excluded from the ice as it forms, which can increase the salinity in the residual seawater in polar regions such as the Arctic Ocean.[98][128]

    Due to the effects of climate change on oceans, observations of sea surface salinity between 1950 and 2019 indicate that regions of high salinity and evaporation have become more saline while regions of low salinity and more precipitation have become fresher.[129] It is very likely that the Pacific and Antarctic/Southern Oceans have freshened while the Atlantic has become more saline.[129]

    Dissolved gases

    Sea surface oxygen concentration in moles per cubic meter from the World Ocean Atlas[130]

    Ocean water contains large quantities of dissolved gases, including oxygencarbon dioxide and nitrogen. These dissolve into ocean water via gas exchange at the ocean surface, with the solubility of these gases depending on the temperature and salinity of the water.[16] The four most abundant gases in earth’s atmosphere and oceans are nitrogen, oxygen, argon, and carbon dioxide. In the ocean by volume, the most abundant gases dissolved in seawater are carbon dioxide (including bicarbonate and carbonate ions, 14 mL/L on average), nitrogen (9 mL/L), and oxygen (5 mL/L) at equilibrium at 24 °C (75 °F)[131][132][133] All gases are more soluble – more easily dissolved – in colder water than in warmer water. For example, when salinity and pressure are held constant, oxygen concentration in water almost doubles when the temperature drops from that of a warm summer day 30 °C (86 °F) to freezing 0 °C (32 °F). Similarly, carbon dioxide and nitrogen gases are more soluble at colder temperatures, and their solubility changes with temperature at different rates.[131][134]

    Oxygen, photosynthesis and carbon cycling

    Further information: Marine biogeochemical cyclesOcean deoxygenationOceanic carbon cycle, and Biological pump

    Diagram of the ocean carbon cycle showing the relative size of stocks (storage) and fluxes[135]

    Photosynthesis in the surface ocean releases oxygen and consumes carbon dioxide. Phytoplankton, a type of microscopic free-floating algae, controls this process. After the plants have grown, oxygen is consumed and carbon dioxide released, as a result of bacterial decomposition of the organic matter created by photosynthesis in the ocean. The sinking and bacterial decomposition of some organic matter in deep ocean water, at depths where the waters are out of contact with the atmosphere, leads to a reduction in oxygen concentrations and increase in carbon dioxide, carbonate and bicarbonate.[107] This cycling of carbon dioxide in oceans is an important part of the global carbon cycle.

    The oceans represent a major carbon sink for carbon dioxide taken up from the atmosphere by photosynthesis and by dissolution (see also carbon sequestration). There is also increased attention on carbon dioxide uptake in coastal marine habitats such as mangroves and saltmarshes. This process is often referred to as “Blue carbon“. The focus is on these ecosystems because they are strong carbon sinks as well as ecologically important habitats under threat from human activities and environmental degradation.

    As deep ocean water circulates throughout the globe, it contains gradually less oxygen and gradually more carbon dioxide with more time away from the air at the surface. This gradual decrease in oxygen concentration happens as sinking organic matter continuously gets decomposed during the time the water is out of contact with the atmosphere.[107] Most of the deep waters of the ocean still contain relatively high concentrations of oxygen sufficient for most animals to survive. However, some ocean areas have very low oxygen due to long periods of isolation of the water from the atmosphere. These oxygen deficient areas, called oxygen minimum zones or hypoxic waters, will generally be made worse by the effects of climate change on oceans.[136][137]

    pH

    Further information: pH § SeawaterSeawater § pH, and Ocean acidification

    The pH value at the surface of oceans (global mean surface pH) is currently approximately in the range of 8.05[138] to 8.08.[139] This makes it slightly alkaline. The pH value at the surface used to be about 8.2 during the past 300 million years.[140] However, between 1950 and 2020, the average pH of the ocean surface fell from approximately 8.15 to 8.05.[141] Carbon dioxide emissions from human activities are the primary cause of this process called ocean acidification, with atmospheric carbon dioxide (CO2) levels exceeding 410 ppm (in 2020).[142] CO2 from the atmosphere is absorbed by the oceans. This produces carbonic acid (H2CO3) which dissociates into a bicarbonate ion (HCO−3) and a hydrogen ion (H+). The presence of free hydrogen ions (H+) lowers the pH of the ocean.

    There is a natural gradient of pH in the ocean which is related to the breakdown of organic matter in deep water which slowly lowers the pH with depth: The pH value of seawater is naturally as low as 7.8 in deep ocean waters as a result of degradation of organic matter there.[143] It can be as high as 8.4 in surface waters in areas of high biological productivity.[107]

    The definition of global mean surface pH refers to the top layer of the water in the ocean, up to around 20 or 100 m depth. In comparison, the average depth of the ocean is about 4 km. The pH value at greater depths (more than 100 m) has not yet been affected by ocean acidification in the same way. There is a large body of deeper water where the natural gradient of pH from 8.2 to about 7.8 still exists and it will take a very long time to acidify these waters, and equally as long to recover from that acidification. But as the top layer of the ocean (the photic zone) is crucial for its marine productivity, any changes to the pH value and temperature of the top layer can have many knock-on effects, for example on marine life and ocean currents (such as effects of climate change on oceans).[107]

    The key issue in terms of the penetration of ocean acidification is the way the surface water mixes with deeper water or does not mix (a lack of mixing is called ocean stratification). This in turn depends on the water temperature and hence is different between the tropics and the polar regions (see ocean#Temperature).[107]

    The chemical properties of seawater complicate pH measurement, and several distinct pH scales exist in chemical oceanography.[144] There is no universally accepted reference pH-scale for seawater and the difference between measurements based on multiple reference scales may be up to 0.14 units.[145]

    Alkalinity

    Further information: Alkalinity § Changes to oceanic alkalinity

    Alkalinity is the balance of base (proton acceptors) and acids (proton donors) in seawater, or indeed any natural waters. The alkalinity acts as a chemical buffer, regulating the pH of seawater. While there are many ions in seawater that can contribute to the alkalinity, many of these are at very low concentrations. This means that the carbonate, bicarbonate and borate ions are the only significant contributors to seawater alkalinity in the open ocean with well oxygenated waters. The first two of these ions contribute more than 95% of this alkalinity.[107]

    The chemical equation for alkalinity in seawater is:AT = [HCO3] + 2[CO32-] + [B(OH)4]

    The growth of phytoplankton in surface ocean waters leads to the conversion of some bicarbonate and carbonate ions into organic matter. Some of this organic matter sinks into the deep ocean where it is broken down back into carbonate and bicarbonate. This process is related to ocean productivity or marine primary production. Thus alkalinity tends to increase with depth and also along the global thermohaline circulation from the Atlantic to the Pacific and Indian Ocean, although these increases are small. The concentrations vary overall by only a few percent.[107][143]

    The absorption of CO2 from the atmosphere does not affect the ocean’s alkalinity.[146]: 2252  It does lead to a reduction in pH value though (termed ocean acidification).[142]

    Residence times of chemical elements and ions

    Residence time of elements in the ocean depends on supply by processes like rock weathering and rivers vs. removal by processes like evaporation and sedimentation.

    The ocean waters contain many chemical elements as dissolved ions. Elements dissolved in ocean waters have a wide range of concentrations. Some elements have very high concentrations of several grams per liter, such as sodium and chloride, together making up the majority of ocean salts. Other elements, such as iron, are present at tiny concentrations of just a few nanograms (10−9 grams) per liter.[125]

    The concentration of any element depends on its rate of supply to the ocean and its rate of removal. Elements enter the ocean from rivers, the atmosphere and hydrothermal vents. Elements are removed from ocean water by sinking and becoming buried in sediments or evaporating to the atmosphere in the case of water and some gases. By estimating the residence time of an element, oceanographers examine the balance of input and removal. Residence time is the average time the element would spend dissolved in the ocean before it is removed. Heavily abundant elements in ocean water such as sodium, have high input rates. This reflects high abundance in rocks and rapid rock weathering, paired with very slow removal from the ocean due to sodium ions being comparatively unreactive and highly soluble. In contrast, other elements such as iron and aluminium are abundant in rocks but very insoluble, meaning that inputs to the ocean are low and removal is rapid. These cycles represent part of the major global cycle of elements that has gone on since the Earth first formed. The residence times of the very abundant elements in the ocean are estimated to be millions of years, while for highly reactive and insoluble elements, residence times are only hundreds of years.[125]

    Chemical element or ionResidence time (years)
    Chloride (Cl)100,000,000
    Sodium (Na+)68,000,000
    Magnesium (Mg2+)13,000,000
    Potassium (K+)12,000,000
    Sulfate (SO42−)11,000,000
    Calcium (Ca2+)1,000,000
    Carbonate (CO32−)110,000
    Silicon (Si)20,000
    Water (H2O)4,100
    Manganese (Mn)1,300
    Aluminum (Al)600
    Iron (Fe)200

    Nutrients

    See also: Eutrophication § Coastal waters

    Map showing 5 circles. The first is between western Australia and eastern Africa. The second is between eastern Australia and western South America. The third is between Japan and western North America. Of the two in the Atlantic, one is in hemisphere.

    North Atlantic
    gyre

    North Atlantic
    gyre

    North Atlantic
    gyre

    Indian
    Ocean
    gyre

    North
    Pacific
    gyre

    South
    Pacific
    gyre

    South Atlantic
            gyre

    Map showing 5 circles. The first is between western Australia and eastern Africa. The second is between eastern Australia and western South America. The third is between Japan and western North America. Of the two in the Atlantic, one is in hemisphere.

    Ocean gyres rotate clockwise in the north and counterclockwise in the south.

    A few elements such as nitrogen, phosphorusiron, and potassium essential for life, are major components of biological material, and are commonly known as “nutrients“. Nitrate and phosphate have ocean residence times of 10,000[149] and 69,000[150] years, respectively, while potassium is a much more abundant ion in the ocean with a residence time of 12 million[151] years. The biological cycling of these elements means that this represents a continuous removal process from the ocean’s water column as degrading organic material sinks to the ocean floor as sediment.

    Phosphate from intensive agriculture and untreated sewage is transported via runoff to rivers and coastal zones to the ocean where it is metabolized. Eventually, it sinks to the ocean floor and is no longer available to humans as a commercial resource.[152] Production of rock phosphate, an essential ingredient in inorganic fertilizer,[153] is a slow geological process that occurs in some of the world’s ocean sediments, rendering mineable sedimentary apatite (phosphate) a non-renewable resource (see peak phosphorus). This continual net deposition loss of non-renewable phosphate from human activities, may become a resource issue for fertilizer production and food security in future.[154][155]

    Marine life

    Main articles: Marine lifeMarine habitatsMarine primary productionMarine biology, and Marine ecosystem

    Some representative ocean animals (not drawn to scale) within their approximate depth-defined ecological habitats. Marine microorganisms also exist on the surfaces and within the tissues and organs of the diverse life inhabiting the ocean, across all ocean habitats. The animals rooted to or living on the ocean floor are not pelagic but are benthic animals.[156]

    Life within the ocean evolved 3 billion years prior to life on land. Both the depth and the distance from shore strongly influence the biodiversity of the plants and animals present in each region.[157] The diversity of life in the ocean is immense, including:

    This section is an excerpt from Marine life.[edit]

    Killer whales (orcas) are highly visible marine apex predators that hunt many large species. But most biological activity in the ocean takes place with microscopic marine organisms that cannot be seen individually with the naked eye, such as marine bacteria and phytoplankton.[158]

    Marine life, sea life or ocean life is the collective ecological communities that encompass all aquatic animalsplantsalgaefungiprotistssingle-celled microorganisms and associated viruses living in the saline water of marine habitats, either the sea water of marginal seas and oceans, or the brackish water of coastal wetlandslagoonsestuaries and inland seas. As of 2023, more than 242,000 marine species have been documented, and perhaps two million marine species are yet to be documented. An average of 2,332 new species per year are being described.[159][160] Marine life is studied scientifically in both marine biology and in biological oceanography.Today, marine species range in size from the microscopic phytoplankton, which can be as small as 0.02–micrometers; to huge cetaceans like the blue whale, which can reach 33 m (108 ft) in length.[161][162] Marine microorganisms have been variously estimated as constituting about 70%[163] or about 90%[164][158] of the total marine biomassMarine primary producers, mainly cyanobacteria and chloroplastic algaeproduce oxygen and sequester carbon via photosynthesis, which generate enormous biomass and significantly influence the atmospheric chemistryMigratory species, such as oceanodromous and anadromous fish, also create biomass and biological energy transfer between different regions of Earth, with many serving as keystone species of various ecosystems. At a fundamental level, marine life affects the nature of the planet, and in part, shape and protect shorelines, and some marine organisms (e.g. corals) even help create new land via accumulated reef-building.

    This section is an excerpt from Marine habitat.[edit]

    marine habitat is a habitat that supports marine life. Marine life depends in some way on the saltwater that is in the sea (the term marine comes from the Latin mare, meaning sea or ocean). A habitat is an ecological or environmental area inhabited by one or more living species.[165] The marine environment supports many kinds of these habitats.

    This section is an excerpt from Marine ecosystem.[edit]

    Coral reefs form complex marine ecosystems with tremendous biodiversity.

    Marine ecosystems are the largest of Earth‘s aquatic ecosystems and exist in waters that have a high salt content. These systems contrast with freshwater ecosystems, which have a lower salt content. Marine waters cover more than 70% of the surface of the Earth and account for more than 97% of Earth’s water supply[166][167] and 90% of habitable space on Earth.[168] Seawater has an average salinity of 35 parts per thousand of water. Actual salinity varies among different marine ecosystems.[169] Marine ecosystems can be divided into many zones depending upon water depth and shoreline features. The oceanic zone is the vast open part of the ocean where animals such as whales, sharks, and tuna live. The benthic zone consists of substrates below water where many invertebrates live. The intertidal zone is the area between high and low tides. Other near-shore (neritic) zones can include mudflatsseagrass meadowsmangroves, rocky intertidal systemssalt marshescoral reefslagoons. In the deep water, hydrothermal vents may occur where chemosynthetic sulfur bacteria form the base of the food web.

    Human uses of the oceans

    Main articles: Sea § Humans and the sea, and The sea in culture

    Global map of all exclusive economic zones

    The ocean has been linked to human activity throughout history. These activities serve a wide variety of purposes, including navigation and explorationnaval warfare, travel, shipping and trade, food production (e.g. fishingwhalingseaweed farmingaquaculture), leisure (cruisingsailingrecreational boat fishingscuba diving), power generation (see marine energy and offshore wind power), extractive industries (offshore drilling and deep sea mining), freshwater production via desalination.

    Many of the world’s goods are moved by ship between the world’s seaports.[170] Large quantities of goods are transported across the ocean, especially across the Atlantic and around the Pacific Rim.[171] Many types of cargo including manufactured goods, are typically transported in standard sized, lockable containers that are loaded on purpose-built container ships at dedicated terminals.[172] Containerization greatly boosted the efficiency and reduced the cost of shipping products by sea. This was a major factor in the rise of globalization and exponential increases in international trade in the mid-to-late 20th century.[173]

    Oceans are also the major supply source for the fishing industry. Some of the major harvests are shrimpfishcrabs, and lobster.[77] The biggest global commercial fishery is for anchoviesAlaska pollock and tuna.[174]: 6  A report by FAO in 2020 stated that “in 2017, 34 percent of the fish stocks of the world’s marine fisheries were classified as overfished“.[174]: 54  Fish and other fishery products from both wild fisheries and aquaculture are among the most widely consumed sources of protein and other essential nutrients. Data in 2017 showed that “fish consumption accounted for 17 percent of the global population’s intake of animal proteins”.[174] To fulfill this need, coastal countries have exploited marine resources in their exclusive economic zone. Fishing vessels are increasingly venturing out to exploit stocks in international waters.[175]

    The ocean has a vast amount of energy carried by ocean wavestidessalinity differences, and ocean temperature differences which can be harnessed to generate electricity.[176] Forms of sustainable marine energy include tidal powerocean thermal energy and wave power.[176][177] Offshore wind power is captured by wind turbines placed out on the ocean; it has the advantage that wind speeds are higher than on land, though wind farms are more costly to construct offshore.[178] There are large deposits of petroleum, as oil and natural gas, in rocks beneath the ocean floor. Offshore platforms and drilling rigs extract the oil or gas and store it for transport to land.[179]

    “Freedom of the seas” is a principle in international law dating from the seventeenth century. It stresses freedom to navigate the oceans and disapproves of war fought in international waters.[180] Today, this concept is enshrined in the United Nations Convention on the Law of the Sea (UNCLOS).[180]

    The International Maritime Organization (IMO), which was ratified in 1958, is mainly responsible for maritime safety, liability and compensation, and has held some conventions on marine pollution related to shipping incidents. Ocean governance is the conduct of the policy, actions and affairs regarding the world’s oceans.[181]

    Threats from human activities

    Global cumulative human impact on the ocean[182]

    Further information: Human impact on marine life

    Human activities affect marine life and marine habitats through many negative influences, such as marine pollution (including marine debris and microplastics) overfishing, ocean acidification and other effects of climate change on oceans.

    Climate change

    This section is an excerpt from Effects of climate change on oceans.[edit]

    There are many effects of climate change on oceans. One of the most important is an increase in ocean temperatures. More frequent marine heatwaves are linked to this. The rising temperature contributes to a rise in sea levels due to the expansion of water as it warms and the melting of ice sheets on land. Other effects on oceans include sea ice decline, reducing pH values and oxygen levels, as well as increased ocean stratification. All this can lead to changes of ocean currents, for example a weakening of the Atlantic meridional overturning circulation (AMOC).[108] The main cause of these changes are the emissions of greenhouse gases from human activities, mainly burning of fossil fuels and deforestationCarbon dioxide and methane are examples of greenhouse gases. The additional greenhouse effect leads to ocean warming because the ocean takes up most of the additional heat in the climate system.[183] The ocean also absorbs some of the extra carbon dioxide that is in the atmosphere. This causes the pH value of the seawater to drop.[184] Scientists estimate that the ocean absorbs about 25% of all human-caused CO2 emissions.[184]

    The various layers of the oceans have different temperatures. For example, the water is colder towards the bottom of the ocean. This temperature stratification will increase as the ocean surface warms due to rising air temperatures.[185]: 471  Connected to this is a decline in mixing of the ocean layers, so that warm water stabilises near the surface. A reduction of cold, deep water circulation follows. The reduced vertical mixing makes it harder for the ocean to absorb heat. So a larger share of future warming goes into the atmosphere and land. One result is an increase in the amount of energy available for tropical cyclones and other storms. Another result is a decrease in nutrients for fish in the upper ocean layers. These changes also reduce the ocean’s capacity to store carbon.[186] At the same time, contrasts in salinity are increasing. Salty areas are becoming saltier and fresher areas less salty.[187]

    Warmer water cannot contain the same amount of oxygen as cold water. As a result, oxygen from the oceans moves to the atmosphere. Increased thermal stratification may reduce the supply of oxygen from surface waters to deeper waters. This lowers the water’s oxygen content even more.[188] The ocean has already lost oxygen throughout its water columnOxygen minimum zones are increasing in size worldwide.[185]: 471 These changes harm marine ecosystems, and this can lead to biodiversity loss or changes in species distribution.[108] This in turn can affect fishing and coastal tourism. For example, rising water temperatures are harming tropical coral reefs. The direct effect is coral bleaching on these reefs, because they are sensitive to even minor temperature changes. So a small increase in water temperature could have a significant impact in these environments. Another example is loss of sea ice habitats due to warming. This will have severe impacts on polar bears and other animals that rely on it. The effects of climate change on oceans put additional pressures on ocean ecosystems which are already under pressure by other impacts from human activities.[108]

    Marine pollution

    This section is an excerpt from Marine pollution.[edit]

    Marine pollution occurs when substances used or spread by humans, such as industrialagricultural and residential wasteparticlesnoise, excess carbon dioxide or invasive organisms enter the ocean and cause harmful effects there. The majority of this waste (80%) comes from land-based activity, although marine transportation significantly contributes as well.[189] It is a combination of chemicals and trash, most of which comes from land sources and is washed or blown into the ocean. This pollution results in damage to the environment, to the health of all organisms, and to economic structures worldwide.[190] Since most inputs come from land, either via the riverssewage or the atmosphere, it means that continental shelves are more vulnerable to pollution. Air pollution is also a contributing factor by carrying off iron, carbonic acid, nitrogen, silicon, sulfur, pesticides or dust particles into the ocean.[191] The pollution often comes from nonpoint sources such as agricultural runoff, wind-blown debris, and dust. These nonpoint sources are largely due to runoff that enters the ocean through rivers, but wind-blown debris and dust can also play a role, as these pollutants can settle into waterways and oceans.[192] Pathways of pollution include direct discharge, land runoff, ship pollutionbilge pollutiondredging (which can create dredge plumes), atmospheric pollution and, potentially, deep sea mining.

    The types of marine pollution can be grouped as pollution from marine debrisplastic pollution, including microplasticsocean acidificationnutrient pollution, toxins and underwater noise. Plastic pollution in the ocean is a type of marine pollution by plastics, ranging in size from large original material such as bottles and bags, down to microplastics formed from the fragmentation of plastic material. Marine debris is mainly discarded human rubbish which floats on, or is suspended in the ocean. Plastic pollution is harmful to marine life.

    Another concern is the runoff of nutrients (nitrogen and phosphorus) from intensive agriculture, and the disposal of untreated or partially treated sewage to rivers and subsequently oceans. These nitrogen and phosphorus nutrients (which are also contained in fertilizers) stimulate phytoplankton and macroalgal growth, which can lead to harmful algal blooms (eutrophication) which can be harmful to humans as well as marine creatures. Excessive algal growth can also smother sensitive coral reefs and lead to loss of biodiversity and coral health. A second major concern is that the degradation of algal blooms can lead to consumption of oxygen in coastal waters, a situation that may worsen with climate change as warming reduces vertical mixing of the water column.[193]Many potentially toxic chemicals adhere to tiny particles which are then taken up by plankton and benthic animals, most of which are either deposit feeders or filter feeders. In this way, the toxins are concentrated upward within ocean food chains. When pesticides are incorporated into the marine ecosystem, they quickly become absorbed into marine food webs. Once in the food webs, these pesticides can cause mutations, as well as diseases, which can be harmful to humans as well as the entire food web. Toxic metals can also be introduced into marine food webs. These can cause a change to tissue matter, biochemistry, behavior, reproduction, and suppress growth in marine life. Also, many animal feeds have a high fish meal or fish hydrolysate content. In this way, marine toxins can be transferred to land animals, and appear later in meat and dairy products.

    Overfishing

    This section is an excerpt from Overfishing.[edit]

    Overfishing is the removal of a species of fish (i.e. fishing) from a body of water at a rate greater than that the species can replenish its population naturally (i.e. the overexploitation of the fishery‘s existing fish stock), resulting in the species becoming increasingly underpopulated in that area. Overfishing can occur in water bodies of any sizes, such as pondswetlandsriverslakes or oceans, and can result in resource depletion, reduced biological growth rates and low biomass levels. Sustained overfishing can lead to critical depensation, where the fish population is no longer able to sustain itself. Some forms of overfishing, such as the overfishing of sharks, has led to the upset of entire marine ecosystems.[194] Types of overfishing include growth overfishing, recruitment overfishing, and ecosystem overfishing. Overfishing not only causes negative impacts on biodiversity and ecosystem functioning, but also reduces fish production, which subsequently leads to negative social and economic consequences.[195]

    Protection

    Main articles: Marine conservation and marine protected area

    Ocean protection serves to safeguard the ecosystems in the oceans upon which humans depend.[196][197] Protecting these ecosystems from threats is a major component of environmental protection. One of protective measures is the creation and enforcement of marine protected areas (MPAs). Marine protection may need to be considered within a national, regional and international context.[198] Other measures include supply chain transparency requirement policies, policies to prevent marine pollution, ecosystem-assistance (e.g. for coral reefs) and support for sustainable seafood (e.g. sustainable fishing practices and types of aquaculture). There is also the protection of marine resources and components whose extraction or disturbance would cause substantial harm, engagement of broader publics and impacted communities,[199] and the development of ocean clean-up projects (removal of marine plastic pollution). Examples of the latter include Clean Oceans International and The Ocean Cleanup.

    In 2021, 43 expert scientists published the first scientific framework version that – via integration, review, clarifications and standardization – enables the evaluation of levels of protection of marine protected areas and can serve as a guide for any subsequent efforts to improve, plan and monitor marine protection quality and extents. Examples are the efforts towards the 30%-protection-goal of the “Global Deal For Nature”[200] and the UN’s Sustainable Development Goal 14 (“life below water”).[201][202]

    In March 2023 a High Seas Treaty was signed. It is legally binding. The main achievement is the new possibility to create marine protected areas in international waters. By doing so the agreement now makes it possible to protect 30% of the oceans by 2030 (part of the 30 by 30 target).[203][204] The treaty has articles regarding the principle “polluter-pays”, and different impacts of human activities including areas beyond the national jurisdiction of the countries making those activities. The agreement was adopted by the 193 United Nations Member States.[205]

  • River 

    river is a natural freshwater stream that flows on land or inside caves towards another body of water at a lower elevation, such as an oceanlake, or another river. A river may run dry before reaching the end of its course if it runs out of water, or only flow during certain seasons. Rivers are regulated by the water cycle, the processes by which water moves around the Earth. Water first enters rivers through precipitation, whether from rainfall, the runoff of water down a slope, the melting of glaciers or snow, or seepage from aquifers beneath the surface of the Earth.

    A boat floats on the Mekong, in Laos

    Rivers flow in channeled watercourses and merge in confluences to form drainage basins, areas where surface water eventually flows to a common outlet. Rivers have a great effect on the landscape around them. They may regularly overflow their banks and flood the surrounding area, spreading nutrients to the surrounding area. Sediment or alluvium carried by rivers shapes the landscape around it, forming deltas and islands where the flow slows down. Rivers rarely run in a straight line, instead, they bend or meander; the locations of a river’s banks can change frequently. Rivers get their alluvium from erosion, which carves rock into canyons and valleys.

    Rivers have sustained human and animal life for millennia, including the first human civilizations. The organisms that live around or in a river such as fishaquatic plants, and insects have different roles, including processing organic matter and predation. Rivers have produced abundant resources for humans, including foodtransportationdrinking water, and recreation. Humans have engineered rivers to prevent flooding, irrigate crops, perform work with water wheels, and produce hydroelectricity from dams. People associate rivers with life and fertility and have strong religious, political, social, and mythological attachments to them.

    The Tiber river in Rome near the Ponte Sant’AngeloItaly

    Rivers and river ecosystems are threatened by water pollutionclimate change, and human activity. The construction of dams, canalslevees, and other engineered structures has eliminated habitats, has caused the extinction of some species, and lowered the amount of alluvium flowing through rivers. Decreased snowfall from climate change has resulted in less water available for rivers during the summer. Regulation of pollution, dam removal, and sewage treatment have helped to improve water quality and restore river habitats.

    Topography

    Definition

    Flamingos in the delta of the Po riverItaly

    A river is a natural flow of freshwater that flows on or through land towards another body of water downhill.[1] This flow can be into a lake, an ocean, or another river.[1] A stream refers to water that flows in a natural channel, a geographic feature that can contain flowing water.[2] A stream may also be referred to as a watercourse.[2] The study of the movement of water as it occurs on Earth is called hydrology, and their effect on the landscape is covered by geomorphology.[2]

    Source and drainage basin

    The major drainage basins in North America

    Rivers are part of the water cycle, the continuous processes by which water moves about Earth.[3] This means that all water that flows in rivers must ultimately come from precipitation.[3] The sides of rivers have land that is at a higher elevation than the river itself, and in these areas, water flows downhill into the river.[4] The headwaters of a river are the smaller streams that feed a river, and make up the river’s source.[4] These streams may be small and flow rapidly down the sides of mountains.[5] All of the land uphill of a river that feeds it with water in this way is in that river’s drainage basin or watershed.[4] A ridge of higher elevation land is what typically separates drainage basins; water on one side of a ridge will flow into one set of rivers, and water on the other side will flow into another.[4] One example of this is the Continental Divide of the Americas in the Rocky Mountains. Water on the western side of the divide flows into the Pacific Ocean, whereas water on the other side flows into the Atlantic Ocean.[4]

    The end of a glacier, which looks like a wall of ice. Blue water filled with snow and ice is at the bottom of the cliff.
    Melting toe of the Perito Moreno Glacier in Los Glaciares National Park, Argentina

    Not all precipitation flows directly into rivers; some water seeps into underground aquifers.[3] These, in turn, can still feed rivers via the water table, the groundwater beneath the surface of the land stored in the soil. Water flows into rivers in places where the river’s elevation is lower than that of the water table.[3] This phenomenon is why rivers can still flow even during times of drought.[3] Rivers are also fed by the melting of snow glaciers present in higher elevation regions.[3] In summer months, higher temperatures melt snow and ice, causing additional water to flow into rivers. Glacier melt can supplement snow melt in times like the late summer, when there may be less snow left to melt, helping to ensure that the rivers downstream of the glaciers have a continuous supply of water.[3]

    The flow of rivers

    Rivers flow downhill, with their direction determined by gravity.[6] A common misconception holds that all or most rivers flow from North to South, but this is not true.[6] As rivers flow downstream, they eventually merge to form larger rivers. A river that feeds into another is a tributary, and the place they meet is a confluence.[4] Rivers must flow to lower altitudes due to gravity.[3] The bed of a river is typically within a river valley between hills or mountains. Rivers flowing through an impermeable section of land such as rocks will erode the slopes on the sides of the river.[7] When a river carves a plateau or a similar high-elevation area, a canyon can form, with cliffs on either side of the river.[8][4] Areas of a river with softer rock weather faster than areas with harder rock, causing a difference in elevation between two points of a river. This can cause the formation of a waterfall as the river’s flow falls down a vertical drop.[9]

    The Grand Canyon was carved by the Colorado River.

    A river in a permeable area does not exhibit this behavior and may even have raised banks due to sediment.[7] Rivers also change their landscape through their transportation of sediment, often known as alluvium when applied specifically to rivers.[10][7] This debris comes from erosion performed by the rivers themselves, debris swept into rivers by rainfall, as well as erosion caused by the slow movement of glaciers. The sand in deserts and the sediment that forms bar islands is from rivers.[10] The particle size of the debris is gradually sorted by the river, with heavier particles like rocks sinking to the bottom, and finer particles like sand or silt carried further downriver. This sediment may be deposited in river valleys or carried to the sea.[7]

    The sediment yield of a river is the quantity of sand per unit area within a watershed that is removed over a period of time.[11] The monitoring of the sediment yield of a river is important for ecologists to understand the health of its ecosystems, the rate of erosion of the river’s environment, and the effects of human activity.[11]

    A photo showing a wide river with a variety of low wetland vegetation on the sides.
    The Nile in Egypt is known for its fertile floodplains, which flood annually.

    Rivers rarely run in a straight direction, instead preferring to bend or meander.[10] This is because any natural impediment to the flow of the river may cause the current to deflect in a different direction. When this happens, the alluvium carried by the river can build up against this impediment, redirecting the course of the river. The flow is then directed against the opposite bank of the river, which will erode into a more concave shape to accommodate the flow. The bank will still block the flow, causing it to reflect in the other direction. Thus, a bend in the river is created.[7]

    Rivers may run through low, flat regions on their way to the sea.[12] These places may have floodplains that are periodically flooded when there is a high level of water running through the river. These events may be referred to as “wet seasons’ and “dry seasons” when the flooding is predictable due to the climate.[12] The alluvium carried by rivers, laden with minerals, is deposited into the floodplain when the banks spill over, providing new nutrients to the soil, allowing them to support human activity like farming as well as a host of plant and animal life.[12][4] Deposited sediment from rivers can form temporary or long-lasting fluvial islands.[13] These islands exist in almost every river.[13]

    Non-perennial rivers

    About half of all waterways on Earth are intermittent rivers, which do not always have a continuous flow of water throughout the year.[14] This may be because an arid climate is too dry depending on the season to support a stream, or because a river is seasonally frozen in the winter (such as in an area with substantial permafrost), or in the headwaters of rivers in mountains, where snowmelt is required to fuel the river.[14] These rivers can appear in a variety of climates, and still provide a habitat for aquatic life and perform other ecological functions.[14]

    Subterranean rivers

    A river of blue water flowing through a brown rock cave with sun peeking through.
    The Blue Water Cave in Quezon, Philippines features an underground river.

    Subterranean rivers may flow underground through flooded caves.[15] This can happen in karst systems, where rock dissolves to form caves. These rivers provide a habitat for diverse microorganisms and have become an important target of study by microbiologists.[15] Other rivers and streams have been covered over or converted to run in tunnels due to human development.[16] These rivers do not typically host any life, and are often used only for stormwater or flood control.[16] One such example is the Sunswick Creek in New York City, which was covered in the 1800s and now exists only as a sewer-like pipe.[16]

    The terminus

    A satellite photo of a large river delta with many branching paths.
    The Lena river delta in Russia is formed from the river’s sediment.

    While rivers may flow into lakes or man-made features such as reservoirs, the water they contain will always tend to flow down toward the ocean.[3] However, if human activity siphons too much water away from a river for other uses, the riverbed may run dry before reaching the sea.[3] The outlets mouth of a river can take several forms. Tidal rivers (often part of an estuary) have their levels rise and fall with the tide.[3] Since the levels of these rivers are often already at or near sea level, the flow of alluvium and the brackish water that flows in these rivers may be either upriver or downriver depending on the time of day.[7]

    Rivers that are not tidal may form deltas that continuously deposit alluvium into the sea from their mouths.[7] Depending on the activity of waves, the strength of the river, and the strength of the tidal current, the sediment can accumulate to form new land.[17] When viewed from above, a delta can appear to take the form of several triangular shapes as the river mouth appears to fan out from the original coastline.[17]

    Classification

    Main article: Stream order

    A diagram of a possible river with the Strahler number of each tributary labeled.

    In hydrology, a stream order is a positive integer used to describe the level of river branching in a drainage basin.[18] Several systems of stream order exist, one of which is the Strahler number. In this system, the first tributaries of a river are 1st order rivers. When two 1st order rivers merge, the resulting river is 2nd order. If a river of a higher order and a lower order merge, the order is incremented from whichever of the previous rivers had the higher order.[18] Stream order is correlated with and thus can be used to predict certain data points related to rivers, such as the size of the drainage basin (drainage area), and the length of the channel.[18]

    Ecology

    Models

    River Continuum Concept

    A few leafy trees around a small stream
    The headwaters of the River Wey in England provide organic matter for organisms to process.

    The ecosystem of a river includes the life that lives in its water, on its banks, and in the surrounding land.[19] The width of the channel of a river, its velocity, and how shaded it is by nearby trees. Creatures in a river ecosystem may be divided into many roles based on the River Continuum Concept. “Shredders” are organisms that consume this organic material. The role of a “grazer” or “scraper” organism is to feed on the algae that collects on rocks and plants. “Collectors” consume the detritus of dead organisms. Lastly, predators feed on living things to survive.[19]

    The river can then be modeled by the availability of resources for each creature’s role. A shady area with deciduous trees might experience frequent deposits of organic matter in the form of leaves. In this type of ecosystem, collectors and shredders will be most active.[19] As the river becomes deeper and wider, it may move slower and receive more sunlight. This supports invertebrates and a variety of fish, as well as scrapers feeding on algae.[20] Further downstream, the river may get most of its energy from organic matter that was already processed upstream by collectors and shredders. Predators may be more active here, including fish that feed on plants, plankton, and other fish.[20]

    Flood pulse concept

    A small channel of water in the late fall or winter, surrounded by brown marsh-like vegetation
    This marsh is a floodplain of the Narew in Poland.

    The flood pulse concept focuses on habitats that flood seasonally, including lakes and marshes. The land that interfaces with a water body is that body’s riparian zone. Plants in the riparian zone of a river help stabilize its banks to prevent erosion and filter alluvium deposited by the river on the shore, including processing the nitrogen and other nutrients it contains. Forests in a riparian zone also provide important animal habitats.[19]

    Fish zonation concept

    River ecosystems have also been categorized based on the variety of aquatic life they can sustain, also known as the fish zonation concept.[21] Smaller rivers can only sustain smaller fish that can comfortably fit in its waters, whereas larger rivers can contain both small fish and large fish. This means that larger rivers can host a larger variety of species.[21] This is analogous to the species-area relationship, the concept of larger habitats being host to more species. In this case, it is known as the species-discharge relationship, referring specifically to the discharge of a river, the amount of water passing through it at a particular time.[21]

    Movement of organisms

    The flow of a river can act as a means of transportation for plant and animal species, as well as a barrier. For example, the Amazon River is so wide in parts that the variety of species on either side of its basin are distinct.[19] Some fish may swim upstream to spawn as part of a seasonal migration. Species that travel from the sea to breed in freshwater rivers are anadromous. Salmon are an anadromous fish that may die in the river after spawning, contributing nutrients back to the river ecosystem.[19]

    Human uses

    Infrastructure

    Main article: River engineering

    A road over a raised embankment of earth, a marsh on the left side, and some small farms on the other.
    This levee protects the city of Honghu in the Hubei province of China from flooding.

    Modern river engineering involves a large-scale collection of independent river engineering structures that have the goal of flood control, improved navigation, recreation, and ecosystem management.[22] Many of these projects have the effect of normalizing the effects of rivers; the greatest floods are smaller and more predictable, and larger sections are open for navigation by boats and other watercraft.[22] A major effect of river engineering has been a reduced sediment output of large rivers. For example, the Mississippi River produced 400 million tons of sediment per year.[22] Due to the construction of reservoirs, sediment buildup in man-made levees, and the removal of natural banks replaced with revetments, this sediment output has been reduced by 60%.[22]

    The most basic river projects involve the clearing of obstructions like fallen trees. This can scale up to dredging, the excavation of sediment buildup in a channel, to provide a deeper area for navigation.[22] These activities require regular maintenance as the location of the river banks changes over time, floods bring foreign objects into the river, and natural sediment buildup continues.[22] Artificial channels are often constructed to “cut off” winding sections of a river with a shorter path, or to direct the flow of a river in a straighter direction.[22] This effect, known as channelization, has made the distance required to traverse the Missouri River in 116 kilometres (72 mi) shorter.[22]

    A grey dam in the distance spilling water from its center. Mountains are in the background.
    The Na Hang Dam in Vietnam provides hydroelectric power.

    Dikes are channels built perpendicular to the flow of the river beneath its surface. These help rivers flow straighter by increasing the speed of the water at the middle of the channel, helping to control floods.[22] Levees are also used for this purpose. They can be thought of as dams constructed on the sides of rivers, meant to hold back water from flooding the surrounding area during periods of high rainfall. They are often constructed by building up the natural terrain with soil or clay.[22] Some levees are supplemented with floodways, channels used to redirect floodwater away from farms and populated areas.[22]

    Dams restrict the flow of water through a river. They can be built for navigational purposes, providing a higher level of water upstream for boats to travel in. They may also be used for hydroelectricity, or power generation from rivers.[22] Dams typically transform a section of the river behind them into a lake or reservoir. This can provide nearby cities with a predictable supply of drinking water. Hydroelectricity is desirable as a form of renewable energy that does not require any inputs beyond the river itself.[23] Dams are very common worldwide, with at least 75,000 higher than 6 feet (1.8 m) in the U.S. Globally, reservoirs created by dams cover 193,500 square miles (501,000 km2).[23] Dam-building reached a peak in the 1970s, when between two or three dams were completed every day, and has since begun to decline. New dam projects are primarily focused in ChinaIndia, and other areas in Asia.[24]

    History

    The Sumerian civilization was made possible by the floodplains of the Tigris and Euphrates rivers.

    Pre-industrial era

    The first civilizations of Earth were born on floodplains between 5,500 and 3,500 years ago.[19] The freshwater, fertile soil, and transportation provided by rivers helped create the conditions for complex societies to emerge. Three such civilizations were the Sumerians in the Tigris–Euphrates river system, the Ancient Egyptian civilization in the Nile, and the Indus Valley Civilization on the Indus River.[19][25] The desert climates of the surrounding areas made these societies especially reliant on rivers for survival, leading to people clustering in these areas to form the first cities.[26] It is also thought that these civilizations were the first to organize the irrigation of desert environments for growing food.[26] Growing food at scale allowed people to specialize in other roles, form hierarchies, and organize themselves in new ways, leading to the birth of civilization.[26]

    A drawing of a man raising water from a river with a bowl mounted on the end of a large rod with a counterweight on the other end
    The counterweight system of the shadoof is an early example of the engineering of river water.

    In pre-industrial society, rivers were a source of transportation and abundant resources.[19][26] Many civilizations depended on what resources were local to them to survive. Shipping of commodities, especially the floating of wood on rivers to transport it, was especially important. Rivers also were an important source of drinking water. For civilizations built around rivers, fish were an important part of the diet of humans.[26] Some rivers supported fishing activities, but were ill-suited to farming, such as those in the Pacific Northwest.[26] Other animals that live in or near rivers like frogsmussels, and beavers could provide food and valuable goods such as fur.[19]

    Humans have been building infrastructure to use rivers for thousands of years.[19] The Sadd el-Kafara dam near Cairo, Egypt, is an ancient dam built on the Nile 4,500 years ago. The Ancient Roman civilization used aqueducts to transport water to urban areasSpanish Muslims used mills and water wheels beginning in the seventh century. Between 130 and 1492, larger dams were built in Japan, Afghanistan, and India, including 20 dams higher than 15 metres (49 ft).[19] Canals began to be cut in Egypt as early as 3000 BC, and the mechanical shadoof began to be used to raise the elevation of water.[26] Drought years harmed crop yields, and leaders of society were incentivized to ensure regular water and food availability to remain in power. Engineering projects like the shadoof and canals could help prevent these crises.[26] Despite this, there is evidence that floodplain-based civilizations may have been abandoned occasionally at a large scale. This has been attributed to unusually large floods destroying infrastructure; however, there is evidence that permanent changes to climate causing higher aridity and lower river flow may have been the determining factor in what river civilizations succeeded or dissolved.[26]

    A red brick building built over a waterfall. The waterfall is a concrete dam structure.
    The Cochecho mill in Dover, New Hampshire, United States was a textile mill powered by the pictured hydroelectric dam.

    Water wheels began to be used at least 2,000 years ago to harness the energy of rivers.[19] Water wheels turn an axle that can supply rotational energy to move water into aqueducts, work metal using a trip hammer, and grind grains with a millstone. In the Middle Ages, water mills began to automate many aspects of manual labor, and spread rapidly. By 1300, there were at least 10,000 mills in England alone. A medieval watermill could do the work of 30–60 human workers.[19] Water mills were often used in conjunction with dams to focus and increase the speed of the water.[19] Water wheels continued to be used up to and through the Industrial Revolution as a source of power for textile mills and other factories, but were eventually supplanted by steam power.[19]

    Industrial era

    A small boat pushes a large flat barge down a wide river in the fall
    The barge is one of the primary means of shipping goods on the Mississippi and other rivers.

    Rivers became more industrialized with the growth of technology and the human population.[19] As fish and water could be brought from elsewhere, and goods and people could be transported via railways, pre-industrial river uses diminished in favor of more complex uses. This meant that the local ecosystems of rivers needed less protection as humans became less reliant on them for their continued flourishing. River engineering began to develop projects that enabled industrial hydropowercanals for the more efficient movement of goods, as well as projects for flood prevention.[19][24]

    River transportation has historically been significantly cheaper and faster than transportation by land.[19] Rivers helped fuel urbanization as goods such as grain and fuel could be floated downriver to supply cities with resources.[27] River transportation is also important for the lumber industry, as logs can be shipped via river. Countries with dense forests and networks of rivers like Sweden have historically benefited the most from this method of trade. The rise of highways and the automobile has made this practice less common.[19]

    A small flat section of canal in the French countryside
    The Canal du Midi was one of the first large canal projects in the world.

    One of the first large canals was the Canal du Midi, connecting rivers within France to create a path from the Atlantic Ocean to the Mediterranean Sea.[24] The nineteenth century saw canal-building become more common, with the U.S. building 4,400 miles (7,100 km) of canals by 1830. Rivers began to be used by cargo ships at a larger scale, and these canals were used in conjunction with river engineering projects like dredging and straightening to ensure the efficient flow of goods.[24] One of the largest such projects is that of the Mississippi River, whose drainage basin covers 40% of the contiguous United States. The river was then used for shipping crops from the American Midwest and cotton from the American South to other states as well as the Atlantic Ocean.[24]

    The role of urban rivers has evolved from when they were a center of trade, food, and transportation to modern times when these uses are less necessary.[27] Rivers remain central to the cultural identity of cities and nations. Famous examples include the River Thames‘s relationship to London, the Seine to Paris, and the Hudson River to New York City.[27] The restoration of water quality and recreation to urban rivers has been a goal of modern administrations. For example, swimming was banned in the Seine for over 100 years due to concerns about pollution and the spread of E. coli, until cleanup efforts to allow its use in the 2024 Summer Olympics.[28] Another example is the restoration of the Isar in Munich from being a fully canalized channel with hard embankments to being wider with naturally sloped banks and vegetation.[29] This has improved wildlife habitat in the Isar, and provided more opportunities for recreation in the river.[29]

    Politics of rivers

    See also: Water rights law

    A medium-sized boat leaving a wake as it travels through murky waters
    This U.S. Customs and Border Protection boat is attempting to prevent crossings of the Rio Grande river from Mexico into the U.S.

    As a natural barrier, rivers are often used as a border between countries, cities, and other territories.[25] For example, the Lamari River in New Guinea separates the Angu and the Fore people in New Guinea. The two cultures speak different languages and rarely mix.[19] 23% of international borders are large rivers (defined as those over 30 meters wide).[25] The traditional northern border of the Roman Empire was the Danube, a river that today forms the border of Hungary and Slovakia. Since the flow of a river is rarely static, the exact location of a river border may be called into question by countries.[19] The Rio Grande between the United States and Mexico is regulated by the International Boundary and Water Commission to manage the right to fresh water from the river, as well as mark the exact location of the border.[19]

    Up to 60% of fresh water used by countries comes from rivers that cross international borders.[19] This can cause disputes between countries that live upstream and downstream of the river. A country that is downstream of another may object to the upstream country diverting too much water for agricultural uses, pollution, as well as the creation of dams that change the river’s flow characteristics.[19] For example, Egypt has an agreement with Sudan requiring a specific minimum volume of water to pass into the Nile yearly over the Aswan Dam, to maintain both countries access to water.[19]

    Religion and mythology

    See also: Sacred waters and Flood myth

    A slow moving river at sunset reflecting the sky
    The Ogun River in Nigeria is sacred to the Yoruba.

    The importance of rivers throughout human history has given them an association with life and fertility. They have also become associated with the reverse, death and destruction, especially through floods. This power has caused rivers to have a central role in religionritual, and mythology.[19]

    In Greek mythology, the underworld is bordered by several rivers.[19] Ancient Greeks believed that the souls of those who perished had to be borne across the River Styx on a boat by Charon in exchange for money.[19] Souls that were judged to be good were admitted to Elysium and permitted to drink water from the River Lethe to forget their previous life.[19] Rivers also appear in descriptions of paradise in Abrahamic religions, beginning with the story of Genesis.[19] A river beginning in the Garden of Eden waters the garden and then splits into four rivers that flow to provide water to the world. These rivers include the Tigris and Euphrates, and two rivers that are possibly apocryphal but may refer to the Nile and the Ganges.[19] The Quran describes these four rivers as flowing with water, milk, wine, and honey, respectively.[19]

    The book of Genesis also contains a story of a great flood.[19] Similar myths are present in the Epic of GilgameshSumerian mythology, and in other cultures.[19][30] In Genesis, the flood’s role was to cleanse Earth of the wrongdoing of humanity. The act of water working to cleanse humans in a ritualistic sense has been compared to the Christian ritual of baptism, famously the Baptism of Jesus in the Jordan River.[19] Floods also appear in Norse mythology, where the world is said to emerge from a void that eleven rivers flowed into. Aboriginal Australian religion and Mesoamerican mythology also have stories of floods, some of which contain no survivors, unlike the Abrahamic flood.[19]

    A castle built into the side of a river with a series of steps leading down into it.
    The ghats along the Ganges river are the steps that allow people to bathe and release the ashes of the dead.[31]

    Along with mythological rivers, religions have also cared for specific rivers as sacred rivers.[19] The Ancient Celtic religion saw rivers as goddesses. The Nile had many gods attached to it. The tears of the goddess Isis were said to be the cause of the river’s yearly flooding, itself personified by the goddess Hapi. Many African religions regard certain rivers as the originator of life. In Yoruba religionYemọja rules over the Ogun River in modern-day Nigeria and is responsible for creating all children and fish.[19] Some sacred rivers have religious prohibitions attached to them, such as not being allowed to drink from them or ride in a boat along certain stretches. In these religions, such as that of the Altai in Russia, the river is considered a living being that must be afforded respect.[19]

    Rivers are some of the most sacred places in Hinduism.[19] There is archeological evidence that mass ritual bathing in rivers at least 5,000 years ago in the Indus river valley.[19] While most rivers in India are revered, the Ganges is most sacred.[31] The river has a central role in various Hindu myths, and its water is said to have properties of healing as well as absolution from sins.[19] Hindus believe that when the cremated remains of a person is released into the Ganges, their soul is released from the mortal world.[31]

    Threats

    A satellite image of a river running dry.
    The Colorado River now runs dry in the deserts of Mexico, rather than running to the sea, due to diversion of water for agricultural uses.[32]

    Freshwater fish make up 40% of the world’s fish species, but 20% of these species are known to have gone extinct in recent years.[33] Human uses of rivers make these species especially vulnerable.[33] Dams and other engineered changes to rivers can block the migration routes of fish and destroy habitats.[34] Rivers that flow freely from headwaters to the sea have better water quality, and also retain their ability to transport nutrient-rich alluvium and other organic material downstream, keeping the ecosystem healthy.[34] The creation of a lake changes the habitat of that portion of water, and blocks the transportation of sediment, as well as preventing the natural meandering of the river.[23] Dams block the migration of fish such as salmon for which fish ladder and other bypass systems have been attempted, but these are not always effective.[23]

    Pollution from factories and urban areas can also damage water quality.[33][27] “Per- and polyfluoroalkyl substances (PFAS) is a widely used chemical that breaks down at a slow rate.[35] It has been found in the bodies of humans and animals worldwide, as well as in the soil, with potentially negative health effects.[35] Research into how to remove it from the environment, and how harmful exposure is, is ongoing.[35] Fertilizer from farms can lead to a proliferation of algae on the surface of rivers and oceans, which prevents oxygen and light from dissolving into water, making it impossible for underwater life to survive in these so-called dead zones.[22]

    Urban rivers are typically surrounded by impermeable surfaces like stone, asphalt, and concrete.[19] Cities often have storm drains that direct this water to rivers. This can cause flooding risk as large amounts of water are directed into the rivers. Due to these impermeable surfaces, these rivers often have very little alluvium carried in them, causing more erosion once the river exits the impermeable area.[19] It has historically been common for sewage to be directed directly to rivers via sewer systems without being treated, along with pollution from industry. This has resulted in a loss of animal and plant life in urban rivers, as well as the spread of waterborne diseases such as cholera.[19] In modern times, sewage treatment and controls on pollution from factories have improved the water quality of urban rivers.[19]

    Snow-capped mountains above a lake
    Retreating snow in the Rocky Mountains is expected to reduce the level of waters in the Western United States.

    Climate change can change the flooding cycles and water supply available to rivers.[33] Floods can be larger and more destructive than expected, causing damage to the surrounding areas. Floods can also wash unhealthy chemicals and sediment into rivers.[34] Droughts can be deeper and longer, causing rivers to run dangerously low.[33] This is in part because of a projected loss of snowpack in mountains, meaning that melting snow can’t replenish rivers during warm summer months, leading to lower water levels.[34] Lower-level rivers also have warmer temperatures, threatening species like salmon that prefer colder upstream temperatures.[34]

    Attempts have been made to regulate the exploitation of rivers to preserve their ecological functions.[33] Many wetland areas have become protected from development. Water restrictions can prevent the complete draining of rivers. Limits on the construction of dams, as well as dam removal, can restore the natural habitats of river species.[23] Regulators can also ensure regular releases of water from dams to keep animal habitats supplied with water.[23] Limits on pollutants like pesticides can help improve water quality.[33]

    Extraterrestrial rivers

    An orange moonscape, showing the rusty Mars soil. Impressions in the sand show where rivers once flowed, in a fractal-like form.
    A dried out network of river valleys on Mars

    Today, the surface of Mars does not have liquid water. All water on Mars is part of permafrost ice caps, or trace amounts of water vapor in the atmosphere.[36] However, there is evidence that rivers flowed on Mars for at least 100,000 years.[37] The Hellas Planitia is a crater left behind by an impact from an asteroid. It has sedimentary rock that was formed 3.7 billion years ago, and lava fields that are 3.3 billion years old.[37] High resolution images of the surface of the plain show evidence of a river network, and even river deltas.[37][38] These images reveal channels formed in the rock, recognized by geologists who study rivers on Earth as being formed by rivers,[37] as well as “bench and slope” landforms, outcroppings of rock that show evidence of river erosion. Not only do these formations suggest that rivers once existed, but that they flowed for extensive time periods, and were part of a water cycle that involved precipitation.[37]

    The term flumen, in planetary geology, refers to channels on Saturn‘s moon Titan that may carry liquid.[39][40] Titan’s rivers flow with liquid methane and ethane. There are river valleys that exhibit wave erosion, seas, and oceans.[40] Scientists hope to study these systems to see how coasts erode without the influence of human activity, something that isn’t possible when studying terrestrial rivers.[40]

    Rivers by amount of discharge

    Main article: List of rivers by discharge